Choosing autosampler vials, caps and septa for HPLC and GC
Guides ยท 2026-11-21
A vial that does not fit the autosampler, or a septum that reacts with the solvent, can spoil a run. What to check before you order.
At a glance
- Match the vial format to the autosampler before anything else
- Choose the septum material for the solvent and the number of injections
- Use amber vials for light-sensitive samples
- Use inserts when the sample volume is small
Start with the autosampler
The autosampler manual lists the vial sizes and closure types it accepts. A 2 mL vial with a 9 mm closure is a very common HPLC format, while GC headspace work normally uses larger crimp-top vials. Matching the format first avoids needle and tray problems later.
Closures: screw, crimp or snap
Screw caps are easy to open and reseal. Crimp caps give a tight seal, which matters for volatile samples and headspace. Snap caps are quick for routine, non-volatile work. Whichever you pick, use the cap and septum that the vial is designed for.
Septa and solvents
The septum is the part that touches your sample. PTFE-faced septa are widely used because they are chemically resistant. For many injections from the same vial, choose a septum that reseals well, and check that the solvent does not swell or leach from the material.
Amber glass and inserts
Light-sensitive compounds should go in amber vials. If you only have a few hundred microlitres, a vial insert keeps the sample at the right height for the needle.
See ChromatoMAX chromatography consumables